Pipet Fillers
Devices that fill and empty pipets by suction and pressure to collect and dispense liquids; includes manually operated syringe-style fillers, motorized vacuum options, and accessories.
Pipet fillers or controllers help to more easily and rapidly fill and dispense liquids from pipets.
- Manual pipet fillers
- Application-specific bulbs for Westergren and other specific methods
- Plain and safety bulbs with vacuum, aspirate, and dispense valves
- Pipet pumps that offer one-handed operation
- Electronic pipet fillers
- Battery-operated and rechargeable for portability and flexibility
- Electrically powered for use in hoods or on benchtops
Alkali Scientific ProPette™ MPC, Manual Bulb/Squeeze Pipette Controller with Filter
ProPette™ MPC is the precise and easy to use manual pipette controller that ‘s always ready to use. After attaching a pipette, one squeeze of its large rubber filling bulb is all it takes to start pipetting – there are no wires, no tubing and no battery to recharge! Begin aspirating by touching the EZ-Flow lever which is designed to precisely control the filling speed, based on how gently or firmly you press the lever. A built-in replaceable filter ensures optimum flow rate and protects the controller from liquid penetration and over-fill. A separate button provides a positive blow-out function when required. Made to accept pipettes from 0.1 to 100mL, the silicone “chuck” adapter is flexible, completely autoclavable, and will accommodate all types of serological, “blow-out”, “to deliver,” glass and plastic pipettes with a soft, precise, air-tight seal. One per pack.
V&P Scientific Inc ASPIRATION MANIFOLD, 12 Channel, 12 Well, Deep Well, 19 Gauge, SS Tubes, 60mm Long, 9mm Spacing, Polypropylene
ASPIRATION MANIFOLD, 12 Channel, 12 Well, Deep Well Plate, 19 Gauge, Stainless Steel Tubes, 60mm Long, 9mm Center Spacing, Polypropylene, Female Luer Lok
Integra Biosciences Corp PIPETBOY PRO PINK
Pipet Aid complete with spare sterile filter, two batteries, mains adapter and wall mount. Pink.
Pipette Supplies, Inc. S1 Pipet Filler, Clear
The S1 Pipet Filler is a cordless, lightweight pipet filler that allows longer, fatigue-free pipetting for use with graduated and volumetric glass and plastic serological pipettes. Top performer. Color: Clear. In stock ready to ship.
Sigma Aldrich Fine Chemicals Biosciences Rf3000 Pipette Controller1EA
Powerful pump for quick and accurate measurements.The Rf3000 is an ergonomic lightweight pipette controller made of UV resistant material with adjustable valves and microprocessor control for consistent reliability and accuracy.The powerful pump offers rapid yet sensitive aspiration and dispensing. filling and dispensing speed is easily set with the same hand. Repeatedly press the large mode button and the bright LEDs will indicate one of three modes High Low or Gravity Mode (Gravity Mode to contain pipettes and dispense liquid without the motor).Additional features such as hand-neutral design for right- and left-handed users concave padded triggers and thumb controls ensures many hours of stress-free pipetting. The Rf3000 accommodates glass and plastic pipettes ranging in volume from 1 to 100 mL. The 0.45 A¬m nozzle filter prevents contamination and the 1mL nozzle adapter helps keep small pipettes stable.Long-life single Li-Ion battery allows approximately 20 hours of continuous
Pipette Supplies, Inc. PORTABLE PIPET AID BATTERY
Rechargeable replacement battery (NiMH, 9V, 250mAh) for Drummond Scientific Portable Pipet-Aid, Portable Pipet-Aid XP, Falcon Express Pipet-Aid, as well as the Integra Pipetboy acu instruments with serial numbers below ≤1350000.9V, NiMH Rechargeable. Formerly DR 4-000-035Please be advised that, for safety reasons, these batteries will not be fully charged when shipped. To ensure the battery will last a long time, please perform the following steps once battery is received.1. Charge the battery fully before using.2. Discharge the battery (down to 1.0V per cell) or until your device is running slow or dim. (When the device is slow or dim, do not discharge any further. This will damage the battery.)3. Repeat steps 1 & 2 four (4) times to condition the battery to reach full capacity.4. If you do not use the battery often, Pipette Supplies recommends recharging the battery at least once every two (2) months to maintain capacity.Made in China
Andwin Scientific HIRSCHMANN PIPETTUS
The pipetus pipet filler features a color display that shows the battery level, set pump speed, and dispensing mode. It also has two reusable, built-in safety check valve that acts as a first line of defense from media being accidentally drawn up too far. This product is the only pipet filler with an inductive charging stand that can also perform as a pipet holder.
USA Scientific Inc Pipet-Aid Replacement Filters
Replacement filters for Pipet-Aid controllers with tissue culture nose piece, 5/pack
Andwin Scientific DRUMMOND PIPET AID XP
The Drummond Pipet-Aid XP controller is made to easily and efficiently fill and empty pipettes. The speed of the pipet filler can be easily and conveniently modified to fast, medium, or slow. With a weight of 7.5 ounces, this is also much lighter than the previous models. This product is sold individually with a charger and stand.
Nordson EFD 50/PK Tip Cap Optimum, Blue, 50 per pack
This item has a minimum order quantity of 20 per supplier requirements
50/PK Tip Cap Optimum, Blue, 50 per pack
Andwin Scientific Pipetus pipet filler with color display, 0.1 mL to 200
The pipetus pipet filler features a color display that shows the battery level, speed level, and pipetting mode. This product provides highly accurate pipetting. It can also be used for measuring, volumetric and Pasteur pipettes, from 0.1 mL to 200 mL.
Enterprise Technology Solutions Paper Mate Liquid Paper DryLin
DryLine Correction Tape Non-Refillable Green/Purple Applicators 0 17 x 472 2/Pack